PS Audio - Stereo Products - GCPH Phono Stage

GCPH Phono Stage

Awards

Stereo Products > GCPH Phono Stage

GCPH Phono Stage

Starting at just $995.00!

Moving Coil
Moving Magnet
Front panel gain adjust
Remote control volume
Mono
Stereo
Dual mono signal path
Balanced input to output
Phase reversal
Passive RIAA Curve
RIAA accuracy better than 1/10th dB
Impedance matching
Huge power supply
Gain Cell technology
Built in subsonic filter

No better phono stage ever made
Accurate and musical
Low noise
Balanced input to output
Match your cartridge to the gain
Use as a standalone phono preamp
Direct into a power amp or preamp

		"I have hooked up two different tube phono preamps to my VPI table and with each one I got awful hum and RFI. I've tried shielded cables and that didn't help. One of the tube phono preamps had balanced outs and that didn't help. Hum and the local radio station competed with the music through the speakers with both units. (Another oddity: When I listened through my headphones, there was absolutely none of the hum or RFI.) However, when I hooked up things through the PS Audio GCPH...it all cleared up. Virtually no hum or RFI. Same table, same cables, same everything, except the phono preamp. " MS panel

The GCPH is the finest phono stage we have ever made in our 30 year history of building high end phono stages. Awesome musicality, open, spacious sound.

Accepts any cartridge, moving coil or moving magnet. Extremely low noise.
Download the Manual: GCPH Phono Preamplifier Manual

Gain (unbalanced)	-	42/48/54/60dB
Gain (balanced)	-	48/54/60/66 dB
Loading	-	100/500/1k/47k ohms
Output Impedance	-	100 ohms
Dimensions	-	8.5"w x 3"h 15.5"d
Input Capacitance	-	@100ohms/47nF, @500ohm/10nF, @1000ohms/4.7nF, @47kohms/100pF